Module description

A This plugin has been developed aims to manage system status points system. This . A system status point is a specific type of status points used to transmit technical information on the operating status of the gateway or the equipment to which it is connected

In the current version, the plugin handles the processing of the following system status points system :

• Status ACCESS status point of accessibility
• PRT.INFO

This module is responsible for managing status points system. It will evolve as new status point are added. 

...

• CONNEXION LOSS status point

The plugin can be extended to add more system status points in the future if needed. 

ACCESS status point

The 104 centers must receive an accessibility status point indicating that the connected RTU is still functional.

This status message is generated and sent cyclically. The details of the sent message and its cycling are determined in the configuration.

PRT.INFO

In case of a loss of connection with the RTU, the idea is to inform the Center that the connection has been lost. This information is sent as follows:

...

Since this information is configured as fugitive, it is not necessary to reset the piloting to 0.

Configuration

Status point cyclic

The configuration of a status point cyclic is present in the Exchanged_data configuration.

...

 {
	"label" :"GAMBS_0_TS-SYST_ACCES",
	"pivot_id" :"xxx",
	"pivot_type" :"SpsTyp",
	"pivot_subtypes" : ["acces"],
	"ts_syst_cycle" :30
	"protocols" :[
	   {
		  "name" :"hnzip",
		  "typeid":"yyy",
		  "address":"zzz"
	   }
	]
 }

PRT.INFO

The configuration of the status point in Exchanged_data includes the subtype of the status point. To configure a status point as PRT.INFO, the pivot_subtypes attribute is set to prt.inf.

...

• "asset" is the name of the status transmission asset.

Filtering rules

Status point cyclic

The readings are transmitted without verification or modification.

PRT.INFO

The readings are transmitted without verification or modification.

Data processing

Status point cyclic

Input

The cycling of the status point is not conditioned by the reception of data by the module.

Ouput

For each status point configured to be sent cyclically, the generated data is as follows:

...

The type of the status point is read directly from the exchanged_data configuration.

PRT.INFO

Input

The plugin listens to the status reading of the associated South service.

...

If the "gi_status" is in the "finished" state, the plugin must generate a status piont configured with the value 1.

Output

The plugin generates the status point in its output as follows:

...