...
Attribute | Description | Expected values | Mandatory | ||||
---|---|---|---|---|---|---|---|
name | this identifies the protocol stack | iec104client, iec104server, tase2client, tase2server, 61850client, 61850server, etc... | Yes | ||||
version | version number of the configuration file | 2 digits x.y => x = major change, y = minor change | Yes | ||||
connection.path | array of connection paths | ||||||
connection.path.srv_ip | IP address to remote IEC 104 server | IP address | Yes | ||||
connection.path.clt_ip | client IP in case of multiple network interfaces server access | IP address | No | ||||
connection.path.port | port number to remote IEC 104 server | default = 2404 | No | ||||
tls | activation of TLS (see tls configuration chapter for details) | TRUE, FALSE, default = FALSE | No | ||||
k_value | Maximum number of outstanding (unacknowledged) APDU's at a given time | default = 12 | No | ||||
w_value | Acknowledge the reception latest after this number of APDU's | default = 8 | No | ||||
t0_timeout | time out of connection establishment | default = 10 | No | ||||
t1_timeout | time out for send or test APDU's | default = 15 | No | ||||
t2_timeout | time out for acknowledges in case of no data messages (t2 < t1) | default = 10 | No | ||||
t3_timeout | time out for sending test frames | default = 20 | No | ||||
conn_all | establish all paths within one connection at the same time (=TRUE) or only one (=FALSE) | TRUE, FALSE, default = FALSE | No | ||||
start_all | start communication on all established paths at the same time (=TRUE) or on only one (=FALSE) | TRUE, FALSE, default = FALSE | No | ||||
conn_passv | establish connection even in passive mode (=TRUE) or not (=FALSE) | TRUE, FALSE, default = FALSE | No | ||||
orig_size | size of "Originator Address" | 0, 1 (byte) | No | orig_addr | Originator Address | default = 0 | No |
ca_asdu_size | size of "Common Address of ASDU" | default = 2 (byte) | No | ||||
ioaddr_size | size of 'Information Object Address' | default = 3 (byte) | No | ||||
startup_time | time to wait for startup completion | default = 180 (seconds) | No | ||||
asdu_size | maximum ASDU size in transmission direction, if set to "0" => maximum possible value is automatically used. | default = 0 (byte) | No | ||||
gi_time | time to wait for General Interrogation (GI) completion | default = 0 (seconds) | No | ||||
gi_cycle | send General Interrogation (GI) cyclically | TRUE, FALSE, default = FALSE | No | ||||
gi_all_ca | send a separate GI request to every CA; otherwise a broadcast GI request is used | TRUE, FALSE, default = FALSE | No | ||||
gi_repeat_count | repeat GI for this number of times in case it is incomplete | default = 2 | No | ||||
disc_qual | information object quality in case of interrupted connection | IV = Invalid, NT = Not Topical, default = NT | No | ||||
send_iv_time | time delay before infos are sent as invalid (0 = deactivated) | default = 0 | No | ||||
tsiv | specifies what to do with a time stamp marked as 'invalid' | remove, process, default = remove | No | ||||
utc_time | UTC timezone (=TRUE) or local timezone (=FALSE) for time conversion | TRUE, FALSE, default = FALSE | No | ||||
comm_wttag | use commands with time tag (=TRUE) or without time tag (=FALSE) | TRUE, FALSE, default = FALSE | No | ||||
comm_parallel | maximum number of commands to be executed at in parallel (0 = unlimited) | default = 0 | No | ||||
exec_cycl_test | execute cyclical test requests (C_TS_NA_1/C_TS_TA_1) in monitoring direction (=TRUE) or not (=FALSE) | TRUE, FALSE, default = FALSE | No | ||||
startup_state | startup in active mode (=TRUE) or in passive mode (=FALSE) | TRUE, FALSE, default = FALSE | No | ||||
reverse | allow transmission of information objects in reverse direction (=TRUE) or only in standard direction (=FALSE) | TRUE, FALSE, default = FALSE | No |
...