...

However, all host will be with the same IP address.

Disks

The disk is composed:

1. (If the installation is in UEFI) EFI partition in /boot/efi with VFAT filesystem (512 MB).
2. Boot partition in /boot with ext4 filesystem (500 B).
3. Main partition with LVM configuration (30 GB). This partition is divided into 3 parts:
   1. Root partition in / with ext4 filesystem (7 GB).
   2. Log partition in /var/log with ext4 filesystem (1 GB).
   3. Swap partition (500 B).

This can be changed in the build_debian_iso/srv_fai_config/disk_config/ directory. There is always 2 versions (one in Legacy BIOS and an other in UEFI mode with the suffix "_EFI").

Prerequisite

When the host is installed, the ansible/playbooks/cluster_setup_prerequisdebian.yaml need to launch to finish the installation.

...

More details on the kernel's parameters here.

Disks

The disk is composed:

1. (If the installation is in UEFI) EFI partition in /boot/efi with VFAT filesystem (512 MB).
2. Boot partition in /boot with ext4 filesystem (500 B).
3. Main partition with LVM configuration (30 GB). This partition is divided into 3 parts:
   1. Root partition in / with ext4 filesystem (7 GB).
   2. Log partition in /var/log with ext4 filesystem (1 GB).
   3. Swap partition (500 B).

This can be changed in the build_debian_iso/srv_fai_config/disk_config/ directory. There is always 2 versions (one in Legacy BIOS and an other in UEFI mode with the suffix "_EFI").

Virtual cluster

On the host, you must set these sysctl settings:

...