Yocto Installer

•  TODO

The compilation and installation of the Yocto version of SEAPATH is entirely described on the GitHub repository seapath/yocto-bsp.

Debian Installer

To install the cluster, you need to generate an ISO, based on Debian 11, for each host with this repository here.

...

See the below section for more details on the configuration file.

Configuration

In the configuration file, you must define these variables:

...

However, all host will be with the same IP address.

Prerequisite

When the host is installed, the ansible/playbooks/cluster_setup_prerequisdebian.yaml need to launch to finish the installation.

The inventory must define these variables to run the playbook:

...

apply_network_config: Boolean to apply the network configuration

...

admin_ip_addr: IP address for SNMP

...

cpumachinesnort: Range of allowed CPUs for no RT machines

...

cpumachines: Range of allowed CPUs for machines (RT and no RT)

...

cpumachinesrt: Range of allowed CPUs for RT machines

...

cpuovs: Range of allowed CPUs for OpenVSwitch

...

cpusystem: Range of allowed CPUs for the system

...

cpuuser: Range of allowed CPUs for the user

...

IP address

...

main_disk: Main disk device to observe his temperature

...

workqueuemask: The negation of the irqmask (= ~irqmask)

In this part, the playbook define the scheduling and the prioritization (see the section).

Hardening

The ansible/playbooks/cluster_setup_hardening_debian.yaml playbook enables system hardening and the ansible/playbooks/cluster_setup_unhardening_debian.yaml playbook disables it.

The hardened elements are:

• the kernel with the parameters of the command line (see below section), the sysfs and modules;
• the GRUB;
• the systemd services;
• adding of bash profiles;
• SSH server;
• adding of sudo rules;
• the shadow password suite configuration;
• the secure tty;
• the audit daemon.

Kernel

The project uses a real-time kernel, the Linux kernel with the PREEMPT_RT patch. So, he needs to have some parameters as:

...

.

...

In the hardening system, the kernel has these parameters:

• init_on_alloc=1: Fill newly allocated pages and heap objects with zeroes.
• init_on_free=1: Fill freed pages and heap objects with zeroes.
• slab_nomerge: Disable merging of slabs with similar size.
• pti=on: Enable the control Page Table Isolation of user and kernel address spaces.
• slub_debug=ZF: Enable red zoning (Z) and zanity checks (F) on for all slabs (more details here).
• randomize_kstack_offset=on: Enable kernel stack offset randomization.
• slab_common.usercopy_fallback=N:
• iommu=pt: Get best performance using the SR-IOV (TODO).
• security=yama: Use the yama security module to enable at boot.
• mce=0: Disables the time in us to wait for other CPUs on machine checks.
• rng_core.default_quality=500: Set the value of the entropy for the system.
• lsm=apparmor,lockdown,capability,landlock,yama,bpf: Set the order of LSM initialization.

More details on the kernel's parameters here.

Disks

The disk is composed:

1. (If the installation is in UEFI) EFI partition in /boot/efi with VFAT filesystem (512 MB).
2. Boot partition in /boot with ext4 filesystem (500 B).
3. Main partition with LVM configuration (30 GB). This partition is divided into 3 parts:
   1. Root partition in / with ext4 filesystem (7 GB).
   2. Log partition in /var/log with ext4 filesystem (1 GB).
   3. Swap partition (500 B).

This can be changed in the build_debian_iso/srv_fai_config/disk_config/ directory. There is always 2 versions (one in Legacy BIOS and an other in UEFI mode with the suffix "_EFI").

Virtual cluster

On the host, you must set these sysctl settings:

...

...

.

...

You must define 3 network interfaces on each host of your cluster.

...