Page History

...

• configure_firewall: Boolean to configure the firewall (true by default)
• ceph_origin: Origin of the ceph installed files (must be set to distro). SEAPATH installs ceph with an installer (see the installation section)
• ceph_osd_disk: Device to stock datas (only for ceph-osd hosts), it's on this disk ceph will build a rbd. To success the CI, the path should be in /dev/disk/by-path
• cluster_network: Address block to access to cluster network
• dashboard_enabled: Boolean to enable a dashboard (must be set to false)
• devices: List of devices to use for the shared storage. All specified devices will be used entirely
• lvm_volumes: List of volumes to use for the shared storage. To use to replace devices to take a part of the device
• monitor_address: Address where the host will bind
• ntp_service_enabled: Boolean to enable the NTP service (must be set to false). SEAPATH installs a specific NTP client and configure it

• osd_pool_default_min_size: Minimal number of available OSD to ensure cluster success (best: ceil(osd_pool_default_size / 2.0))

• osd_pool_default_size: Number of OSD in the cluster

• public_network: Address block to access to public network

...