...
configure_firewall
: Boolean to configure the firewall (true
by default)ceph_origin
: Origin of the ceph installed files (must be set todistro
). SEAPATH installs ceph with an installer (see the installation section)ceph_osd_disk
: Device to stock datas (only for ceph-osd hosts), it's on this disk ceph will build a rbdcluster_network
: Address block to access to cluster networkdashboard_enabled
: Boolean to enable a dashboard (must be set tofalse
)devices
: List of devices to use for the shared storage. All specified devices will be used entirelylvm_volumes
: List of volumes to use for the shared storage. To use to replacedevices
to take a part of the devicemonitor_address
: Address where the host will bindntp_service_enabled
: Boolean to enable the NTP service (must be set tofalse
). SEAPATH installs a specific NTP client and configure itosd_pool_default_min_size
: Minimal number of available OSD to ensure cluster success (best:ceil(osd_pool_default_size / 2.0)
)osd_pool_default_size
: Number of OSD in the clusterpublic_network
: Address block to access to public network
Volumes specifications
If lvm_volumes
is defined, the devices
variables is ignored.
When a volume is defined for the shared storage, several variables some fields should be set for seapath-ansible and ceph-ansible.
...