The Fugitive data are status points that are transmitted by the station only on "1" control.
The fugitives data are acquired from the station like normal status point. The fugitives data are acquired from the station like normal status point. When a fugitive status point is received (value 1), it is normally transmitted to the north service. A new datapoint is then generated by the module with a value of 0 and is transmitted in the same way to the centers with a modified timestamp (+1ms).
However, on CG they must systematically be sent to 0.
The module needs the list of status point of the site configured as fugitive.
The status points are declared in the "Exchanged data". A property "datapoints.pivot_subtypes" allows to define the nature of a status points. If it is declared as "transient", the plugin must perform the processing associated with this type.
The "datapoints.pivot_id" property corresponds to the identifier of the status point.
R1 : Generation of a new datapoint when a fugitive status point is received (value opposite to the reception, adding 1ms in the timestamp).
R2 : Only status points configured as transient in subtypes are managed by the plugin.
This module is designed to work on status points in pivot format.
The module uses the identification (Attribute "PIVOTTS.GTIS.Identifier") of the data to determine if it is a fugitive status point to process.
If the value "1" is received from the station, the module transmits the value to the center. If the status point is fugitive, a new datapoint is copied with :
The new data generated in the format takes the form :